#Latest data domain os version how to#
#Latest data domain os version update#
#Latest data domain os version driver#

When the software_id does not match the stored software id then it means that new software_id block has started. Next line will check if the software_id matches the one stored in the variable and then compare the date and store the latest one in the variable.

My logic is to read and store the first software_id and installed_date in two variables and start reading the file line by line. I cannot hardcode the software_id to check as there are thousands of them. They have a doc for the compatibility matrix internally for this. How can I choose the set of rows for one software code and remove all rows but the one with the latest date and then move to the next software code until the file only has one entry per software code. Check with VMware support for confirmation. For example, the output of the above file should be: software_id software_name installed_date software_version So from the above data I just need to keep one row with the latest date from each software code.

#Latest data domain os version driver#

Below is the sample data containing two different software: software_id software_name installed_date software_versionĨ331 Intel(R) Graphics Media Accelerator Driver 0:00 8. I am reading the csv file using pandas in a dataframe.

More importantly let’s make sure the Boot order is setup as intended for the future Host restarts.I have a csv file with company software details along with installed dates.

#Latest data domain os version update#

This process doesn’t take long and at this point we can also confirm the update to the latest version plus the RAM memory and Disk configuration working in order.Īt this point we might want to explore and customise the Intel NUC BIOS setting if required. If you find used ones from eBay for example make sure the BIOS update process goes step by step as per instructions provided on the Intel website. For brand new Intel NUC shouldnt be an issue. In the past there might have been issues when flashing “very old” versions directly to the latest ones. Make sure there are no extra steps provided on the Intel website with regards to the Firmware updates. The intel NUC will reboot and start flashing the firmware to the latest version. Let’s select the intended Intel NUC BIOS version and press enter. Just in case let’s do a rescan to refresh the content of the mounted drives. Once we plugged in the USB drive let’s press F7 to start the import process or press F7 directly upon first boot which will lead to the screenshot below. So in my case the next steps will be to download the SYS0057.BIO and place it on a USB Drive formatted with FAT32 file system. I personally prefer to update to the latest version by running the utility built-in the BIOS (F7) in the Intel NUC Bios.

#Latest data domain os version how to#

There are different options on how to apply the latest version. At the time of writing it is version “57” available at this link. After a quick check from the Intel NUC 6i5SYH support page and filtering by Download and OS type we can get to he latest version of the firmware. As soon as we boot the Intel NUC there are the classic 3 options being “F2” the one we’ll be using to configure the BIOS.įrom the homepage of the Intel Visual BIOS we can check the current version of the firmware and the total memory installed. As mentioned in the previous article, we are now ready to review and configure the main Intel NUC BIOS settings making sure the installed RAM memory and Disk Drives are recognised and working properly.